Algaecides

Works with all types of sanitizers, including UV & ozone

• Improves performance of the chlorinators Gross weight 1.32 kg. Box size 17x25x9 cm.

the concentrated product that prevents the formation of algae-derived from chemicals, garden fertilizers, and other pollutants. Removes phosphates, the nutrient for the algae that are generally immune to the effects of chlorine, and are present in the pool water.

Ideal for: All pool types

Added value:

• Works with all types of sanitizers, including UV & ozone

• Improves performance of the chlorinators

Recommended use:

It must be kept a concentration of phosphate below 125 ppb (part per billion) to prevent algae growth

Initial treatment: (for high levels of phosphate)

1. Carry out an analysis of the phosphate levels in the swimming pool using a phosphate kit

2. Make sure the filter is clean and the equipment is functioning properly

3. Calculate the amount of product needed (using the following dosing table), pouring the product does in a container with water, and spread the solution over the surface of the pool uniformly

4. Maintain the filtration system run for at least 24 hours after application

5. After 48 hours, test the level of phosphate in your pool with a phosphate kit. If necessary, repeat the treatment

Maintenance treatment:

 With the filtering treatment on and with no swimmers in the pool, add 65 ml of product for every 50 m3 of water to keep the phosphate levels below 125 ppb (parts per billion)

Note: the use of PHOSFREE may make the swimming pool water cloudy in the initial phase. This is normal and indicates that the product is working. It will disappear in a few minutes